AIRTAC
2 WAY SOLENOID VALVES
Airtac 2W 2 way solenoid valves are available in a normally closed direct acting version from 1/8 port size to 1/2 port size. The direct acting 2W valves are available in a large range of pressures up to 450 PSI. Body construction is brass and the standard seal material is FPM-F. Electrical connection is either grommet or Din style connector and meets IP65. The 2W series also includes an internally piloted normally closed type ranging from 1/2 to 1 port sizes. All 2W series valves are suitable for use with air, oil, or water.
3 WAY SOLENOID VALVES
Airtac 3V 3 way solenoid valves are available in port sizes ranging from 1/8 to 3/8. The 3V1 series is a direct acting normally closed 3/2 valve available in M5 or 1/8 ports. The 3V1 series is a stacking valve which allows multiple valves to be on a manifold together so that they can share a common pressure source.
4 WAY SOLENOID VALVES
Airtac 4V 4 way solenoid valves are solenoid pilot type air valves that are available in sizes ranging through M5, 1/8, 1/4, 3/8, & 1/2. The 4V series of valves are available in single & double solenoid, 3 position closed centre, 3 position exhaust centre and 3 position pressure centre configurations. Available coil voltages include 12/24 VDC as well as 24/110/220 VAC with DIN connector wiring or wire leads.
3 & 4 WAY SOLENOID VALVES WITH MANIFOLD
Airtac 3V and 4V solenoid valve manifold are available to mount 3V 3 way solenoid valves and 4V 4 way solenoid valves to a single air supply which greatly simplifies piping of multiple solenoid valves. Manifolds are available to mount from 2 up to 16 valves.